Arte di mano
Handcrafted by JnK
Leather molding tray
S : 14 x 14cm / L : 14 x 22cm
Sample leather - buttero, Pueblo (Vegetable tanned / hard type/ Italy)
Thread - Serafil / German
.
About Design,
The octagonal plate-shaped molding tray is manufactured using traditional water molding techniques.
The water molding technique is a traditional technique that utilizes the properties of leather that softens when wet with water and the property that hardens as wet leather dries.
It has the property of shrinking when dried, so it is usually dried in a mold. Due to these characteristics, it takes approximately 3 to 4 days for complete drying to produce a single product from one mold.
A completely dried tray is completed by removing unnecessary parts, carving the corners, adding decorative lines, and finishing the cross section neatly.
The molding tray completed in this way is made using Butero leather, a representative high-end vegetable tanned leather, as a single layer raw material, so it conveys the natural physical properties of leather.
The molding tray is manufactured in a stackable form, making it excellent for storage when not in use.
Tray products are receiving a lot of attention not only as personal products, but also as store supplies that fill cafes or commercial spaces with custom logos, and as event gifts for brands or organizations. :)
OPTION,
1. Size
Small / Large
It is a square size S.
It is suitable for storing pocket items such as car keys, lip balm, and business cards.
It is a rectangular size L.
In the case of size L, various items such as pens, banknotes, wallets, and smart phones can be stored.
2. Types of Leather
Buttero / Pueblo
Buttero / Single layer
Butero is manufactured as a single layer with a thickness of approximately 3mm.
On the back, you can feel the smooth texture of the back of Buttero.
Pueblo / Double layer
Pueblo leather, which is approximately 2 mm long, is made by joining two pieces of leather together.
For this reason, both the inside and the outside are made from pueblo facings.
Color chart
Buttero
(Vegatable tanned, Italy - Walpier)
Finish - Matt type, Oil, Hard type / Hardness - ★★★★☆
Thickness : 2.6-3.0 mm
This is Buttero, a representative article produced by Walpier, Tannery, which has been the third generation family business and produces the finest leather in Italy.
The leather is vegetable-processed using the finest French hides. It has a very smooth surface and at the same time has a rich oil content, which makes it the best quality leather that boasts a moist touch despite being vegetable. Despite its smooth surface, it has a rich and deep color that is clearly distinguished from other vegetable leathers with the unique touch of leather, rather than an artificial feel, and the unique color expression of Buttero. Like other leathers containing a lot of oil, it is relatively weak against scratches, but the natural traces of the years passed by the accumulation of scratches are more attractive than any other leather. This leather is especially loved in Japan.
Pueblo
(Vegatable tanned, Italy - BADALASSI CARLO)
Finish - Matt type, Art finish by steel ball / Hardness - ★★★☆☆
Thickness : 1.8-2.0 mm
(Final thickness of 2 layers : 3.6-4.0mm)
Pueblo is an art-finish leather from BADALASSI CARLO, a tannery famous for the Minerva box.
It is a leather that expresses details by rolling specially crafted iron beads on Minerva leather with a flat surface to create fine artificial scratches on the leather. When viewed in the state of a director, it is rather similar to a wounded leather, but if you look at the finished work as a product, you can see the expression of texture as an artistic attempt beyond that. Please refer to the result. It is a popular leather that is increasingly in demand around the world. It is recommended for those who enjoy the vintage feel.
* This product is a custom-made product and can be shipped immediately if it is in stock. However, in most cases, the production period for small items is as indicated below.
If you need to purchase quickly, please check the available colors over the phone.
Working period
All of our works is based on Order to made system. And period is depend on the kind of product.
Bags : About 6-12 weeks usually.
Camera cases : About 7-10 weeks usually.
Camera straps & small goods : About 7-10 weeks usually.
Leather skins : About 4-6 weeks usually.
Shipping
We use Fedex shipping service with tracking number. It take about 3-5 business days usually.
Tax & Duty.
Tax or Duty are not included in price. Tax and Duty will be decide by your local custom and it is just on your treat. If you need any other help about this, please contact us before order.
We refuse any type of return because of Tax or Duty, in this case you just can get a refund except all kind of cost.
Return policy.
If there is quality issue or something wrong about order detail, we will do our best to solve the problem and we will accept return and refund. But because it is order to made product, we do not accept return or refund without quality issue.
Payment.
We accept paypal payment. If you need bank transfer, please contact us by email.
Change order detail.
Basically after order, you can't change order detail. Just if we do not start the work about the part that you request, we can arrange it as your request. If you need any help about changing, please let me know. And then we will check it but we just can't sure the order can change as your request.
Arte di mano
Handcrafted by JnK
Leather molding tray
S : 14 x 14cm / L : 14 x 22cm
Sample leather - buttero, Pueblo (Vegetable tanned / hard type/ Italy)
Thread - Serafil / German
.
About Design,
The octagonal plate-shaped molding tray is manufactured using traditional water molding techniques.
The water molding technique is a traditional technique that utilizes the properties of leather that softens when wet with water and the property that hardens as wet leather dries.
It has the property of shrinking when dried, so it is usually dried in a mold. Due to these characteristics, it takes approximately 3 to 4 days for complete drying to produce a single product from one mold.
A completely dried tray is completed by removing unnecessary parts, carving the corners, adding decorative lines, and finishing the cross section neatly.
The molding tray completed in this way is made using Butero leather, a representative high-end vegetable tanned leather, as a single layer raw material, so it conveys the natural physical properties of leather.
The molding tray is manufactured in a stackable form, making it excellent for storage when not in use.
Tray products are receiving a lot of attention not only as personal products, but also as store supplies that fill cafes or commercial spaces with custom logos, and as event gifts for brands or organizations. :)
OPTION,
1. Size
Small / Large
It is a square size S.
It is suitable for storing pocket items such as car keys, lip balm, and business cards.
It is a rectangular size L.
In the case of size L, various items such as pens, banknotes, wallets, and smart phones can be stored.
2. Types of Leather
Buttero / Pueblo
Buttero / Single layer
Butero is manufactured as a single layer with a thickness of approximately 3mm.
On the back, you can feel the smooth texture of the back of Buttero.
Pueblo / Double layer
Pueblo leather, which is approximately 2 mm long, is made by joining two pieces of leather together.
For this reason, both the inside and the outside are made from pueblo facings.
Color chart
Buttero
(Vegatable tanned, Italy - Walpier)
Finish - Matt type, Oil, Hard type / Hardness - ★★★★☆
Thickness : 2.6-3.0 mm
This is Buttero, a representative article produced by Walpier, Tannery, which has been the third generation family business and produces the finest leather in Italy.
The leather is vegetable-processed using the finest French hides. It has a very smooth surface and at the same time has a rich oil content, which makes it the best quality leather that boasts a moist touch despite being vegetable. Despite its smooth surface, it has a rich and deep color that is clearly distinguished from other vegetable leathers with the unique touch of leather, rather than an artificial feel, and the unique color expression of Buttero. Like other leathers containing a lot of oil, it is relatively weak against scratches, but the natural traces of the years passed by the accumulation of scratches are more attractive than any other leather. This leather is especially loved in Japan.
Pueblo
(Vegatable tanned, Italy - BADALASSI CARLO)
Finish - Matt type, Art finish by steel ball / Hardness - ★★★☆☆
Thickness : 1.8-2.0 mm
(Final thickness of 2 layers : 3.6-4.0mm)
Pueblo is an art-finish leather from BADALASSI CARLO, a tannery famous for the Minerva box.
It is a leather that expresses details by rolling specially crafted iron beads on Minerva leather with a flat surface to create fine artificial scratches on the leather. When viewed in the state of a director, it is rather similar to a wounded leather, but if you look at the finished work as a product, you can see the expression of texture as an artistic attempt beyond that. Please refer to the result. It is a popular leather that is increasingly in demand around the world. It is recommended for those who enjoy the vintage feel.
* This product is a custom-made product and can be shipped immediately if it is in stock. However, in most cases, the production period for small items is as indicated below.
If you need to purchase quickly, please check the available colors over the phone.
Working period
All of our works is based on Order to made system. And period is depend on the kind of product.
Bags : About 6-12 weeks usually.
Camera cases : About 7-10 weeks usually.
Camera straps & small goods : About 7-10 weeks usually.
Leather skins : About 4-6 weeks usually.
Shipping
We use Fedex shipping service with tracking number. It take about 3-5 business days usually.
Tax & Duty.
Tax or Duty are not included in price. Tax and Duty will be decide by your local custom and it is just on your treat. If you need any other help about this, please contact us before order.
We refuse any type of return because of Tax or Duty, in this case you just can get a refund except all kind of cost.
Return policy.
If there is quality issue or something wrong about order detail, we will do our best to solve the problem and we will accept return and refund. But because it is order to made product, we do not accept return or refund without quality issue.
Payment.
We accept paypal payment. If you need bank transfer, please contact us by email.
Change order detail.
Basically after order, you can't change order detail. Just if we do not start the work about the part that you request, we can arrange it as your request. If you need any help about changing, please let me know. And then we will check it but we just can't sure the order can change as your request.
